TM 9-2320-363-34-1
1.
REMOVE
2.
REMOVE
TUBE (4)
3.
REMOVE
4.
REMOVE
5.
REMOVE
6.
REMOVE
TWO BOLTS (1) FROM CYLINDER BLOCK (2).
OIL OUTLET TUBE ELBOW (3) FROM OIL OUTLET TUBE (4) AND REMOVE OUTLET
FROM OIL PUMP ASSEMBLY (5).
AND DISCARD TWO SEAL RINGS (6 AND 7).
AND DISCARD GASKET (8).
TWO BOLTS (9) FROM OIL OUTLET TUBE ELBOW (3).
OIL PRESSURE RELIEF VALVE (10) AND GASKET (11). DISCARD GASKET.
7.
REMOVE
8.
TAP OIL
TWO BOLTS (12) FROM CYLINDER BLOCK (2).
PRESSURE REGULATOR VALVE BODY LIGHTLY TO LOOSEN IT FROM GASKET (13)
AND REMOVE OIL PRESSURE REGULATOR VALVE (14). DISCARD GASKET.
1.
CLEAN ALL OLD GASKET MATERIAL FROM OIL PRESSURE REGULATOR VALVE BODY AND
CYLINDER BLOCK MATING SURFACES.
2.
USE GENERAL CLEANING METHODS TO CLEAN ALL PARTS (PAGE 2-30).
Inspect all parts for wear or damage. If parts are pitted or scored, replace.
3-217
