TM 9-2320-302-34
0100 00-1
FRONT SPRING HANGERS REPLACEMENT
0100 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanics (Item 132, WP 0126 00)
Wrench, torque, 50-250 lb-ft (Item 139, WP 0126 00)
Equipment Condition
Front spring removed (WP 0099 00)
Steering gear removed (left side only) (WP 0088 00)
REMOVAL
NOTE
Vehicle may utilize huckbolts instead of screws and nuts. Replace all loose or damaged huckbolts with
grade 8 screws and lock nuts.
Perform steps 1 through 3 on left front side of vehicle.
1.
Remove two lock nuts (1), washers (2), screws (3), and threaded block (4). Discard lock nuts.
1
2
3
4
LEFT FRONT
RIGHT FRONT
REAR