TM 9-2320-302-34
0101 00-2
REAR SUSPENSION CENTER BEARING REPLACEMENT - CONTINUED
0101 00
INSTALLATION
1.
Install center bearing (6) to vehicle with two screws (5). Tighten screws to 68 lb-ft (92 Nm).
2.
Using floor jack, raise rear axle until bottom of center bearing (6) contacts spring assembly (8).
3.
Apply adhesive to threads of two new screws (7). Install center bearing (6) to top of spring assembly (8) with screws.
Tighten screws to 155 lb-ft (210 Nm).
4.
Remove trestles and floor jack.
5.
Install rebound stop (3) to mounting bracket (4) with screw (2) and nut (1). Tighten nut to 68 lb-ft (92 Nm).
END OF WORK PACKAGE
1
4
3
2
5
7
6
7
8
