TM 9-2320-302-34
0099 00-3
FRONT SPRING REPLACEMENT - CONTINUED
0099 00
REMOVAL - CONTINUED
6.
Remove grease fitting (27), four screws (28), washers (29), and two saddle caps (30).
7.
Lower front axle (2) to allow spring (3) to clear front spring hanger (31). Remove two washers (32) and pin (33) from
front of spring (3).
NOTE
Note position and number of shim(s) prior to removal to aid in installation.
8.
With assistance, remove spring (3), spacer (34), shock absorber bracket (35), shim(s) (36), and pin (37) from front axle
(2).
INSTALLATION
WARNING
Shim(s) is used to adjust caster alignment. Failure to install shim(s) correctly will cause hard steering and
could result in injury to personnel.
1.
With assistance, install pin (37), shim(s) (2), shock absorber bracket (35), spacer (34), and spring (3) on front axle (2).
NOTE
Install pin so that grooves line up with holes in shackle, allowing screws to be installed.
2
37
36
35
34
3
33
27
32
32
30
28
29
30
31
