TM 9-2320-302-34
0099 00-2
FRONT SPRING REPLACEMENT - CONTINUED
0099 00
REMOVAL
1.
Using floor jack and two trestles, lift and support frame (1) and front axle (2) to relieve weight from spring (3).
NOTE
Axle stop is offset to one side to align with frame. Note position of axle stop prior to removal to aid in instal-
lation.
2.
Remove four nuts (4), washers (5), two U-bolts (6), and axle stop (7) from front axle (2) and spring (3).
3.
Remove stop cushion (8) from axle stop (7) if excessively worn or damaged (TM 9-2320-302-20).
4.
Remove grease fitting (9), two nuts (10), washers (11), screws (12), washers (13), wear plates (14), four shims (15), and
pin (16) from rear end of spring (3).
5.
Remove grease fitting (17), two nuts (18), washers (19), screws (20), washers (21), shackles (22), wear plates (23), four
shims (24), and pin (25) from rear spring hanger (26).
26
1018
19
22
21
20
13
12
11
23
14
15
16
9
21
20
15
12
13
14
3
4
5
2
7
8
1
6
10
11
19
18
22
23
24
17
25
