TM 9-2320-302-34
0089 00-17
STEERING GEAR REPAIR - CONTINUED
0089 00
ASSEMBLY - CONTINUED
29.
Place housing (4) in vise. Install washer (47) and screw (46) in housing and tighten screw to 38-42 lb-ft (52-57 Nm).
Apply a light coat of lubricating oil to bore of housing.
30.
Apply a light coat of lubricating oil to seal ring (23).
31.
Install rack piston (22) and valve housing (20) assembly in housing (4).
32.
Apply a light coat of lubricating oil to four torx-head screws (21). Using torx socket, install torx-head screws in housing
(4). Tighten screws alternately to 75-85 lb-ft (102-115 Nm).
22
26
27
54
20
25
2
4
46
47
20
21
22
23
