TM 9-2320-302-34
0089 00-15
STEERING GEAR REPAIR - CONTINUED
0089 00
ASSEMBLY - CONTINUED
WARNING
Do not allow valve housing to contact poppet. Such contact could cause steering problems or loss of steering
resulting in possible injury to personnel.
22.
Place rack piston (22), with guide holes up, on padded pedestal high enough so that valve housing (20) can rotate when
assembled. Insert worm end of input shaft (2) into rack piston (22) close to maximum depth. Ensure valve housing does
not contact poppet (54). Line up rack piston guide holes with worm track grooves on input shaft.
WARNING
Do not force guide halves into place. Force may damage guide halves, which could cause loss of steering,
resulting in possible injury to personnel.
NOTE
Rotate input shaft slightly if necessary, to ensure guide halves are properly seated.
54
22
30,31
2
GUIDE
HOLES
20
