TM 9-2320-302-34
0071 00-54
TRANSMISSION OVERHAUL - CONTINUED
0071 00
ASSEMBLY - CONTINUED
Installation of Rear Cover Module
1.
Install new rear cover gasket (36) on main housing (23).
2.
Place rear cover module (35) on main housing (23) using suitable hoist and sling as a lifting fixture.
3.
Install 19 bolts (34). Evenly tighten bolts to 66-81 lb-ft (90-110 Nm).
4.
Retighten retainer lock nut using tool (J37035-1) to 55-65 lb-ft (74-88 Nm).
NOTE
Do not reuse lock nut retainer locking tang once it has been bent. If all tangs have been used (bent), replace
lock nut retainer.
5.
Locate one new locking tang on retainer and bend it up to hold retainer lock nut.
23
36
35
34
