TM 9-2320-302-34
0071 00-52
TRANSMISSION OVERHAUL - CONTINUED
0071 00
ASSEMBLY - CONTINUED
Installation of Main Shaft Module and Selective Shim Measurement
1.
Install main shaft module assembly (37) in main housing (23), without selective shim (39) and thrust bearing (38).
2.
Place a straightedge across rear cover mounting surface.
3.
Measure dimension A, from top of straightedge to selective shim thrust surface on main shaft bearing spacer.
4.
Measure dimension B, thickness of straightedge. Subtract B from A; remainder is dimension C.
23
37
38
39