TM 9-2320-302-34
0071 00-51
TRANSMISSION OVERHAUL - CONTINUED
0071 00
ASSEMBLY - CONTINUED
Installation of P1/P2 Planetary Modules
1.
Install P1 planetary module (44), consisting of P1 carrier and P2 ring gear.
2.
Mesh P1 pinion gears with P1 ring gear inside C3/C4 clutch assembly.
3.
Install P2 planetary module (40), consisting of P2 carrier and P3 ring gear.
4.
Mesh P2 pinion gears with P2 ring gear during installation.
Installation of C5 Clutch Pack
1.
Install C5 clutch pack (41) in main housing (23). Clutch pack consists of nine steel reaction plates (43) and eight friction
plates (42), stacked alternately, starting with a steel reaction plate.
2.
Stack all plates so that plate cone faces same direction. Steel plates mesh with main housing (23) and reaction plates
mesh with P3 ring gear.
46
47
23
45
48
49
23
23
44
23
40
43
42
41
