TM 9-2320-302-20
0130 00-1
DRIVELINE U-JOINTS AND BEARINGS REPLACEMENT
0130 00
THIS WORK PACKAGE COVERS
Main Driveline U-joints Removal, Inter-Axle Driveline U-joints Removal, Main Driveline U-joints Installation, Inter-
Axle Driveline U-joints Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanics (Item 36, WP 0236 00)
Wrench, torque, 15-75 lb-ft (Item 45, WP 0236 00)
Materials/Parts
Screw, lock (P/N 8-73-209) (16)
Grease, GAA (Item 15, WP 0235 00)
Equipment Condition
Drivelines removed from vehicle (WP 0129 00)
MAIN DRIVELINE U-JOINTS REMOVAL
NOTE
Perform following steps at front end of main driveline.
1.
Remove retaining wire (1) from groove of two bearings (2).
2.
Remove two bearings (2) from universal joint (3).
3.
Remove two screws (4) from each of two bearing caps (5). Discard screws.
4.
Remove two bearing caps (5) and universal joint (3) from yoke (6) of main driveline (7).
5.
Remove two grease fittings (8) from universal joint (3).
7
6
2
1
4
5
8
3
2