TM 9-2320-302-20
0129 00-4
DRIVELINE REPLACEMENT - CONTINUED
0129 00
INTER-AXLE DRIVELINE INSTALLATION
NOTE
Perform following steps at rear end of inter-axle driveline.
1.
Position inter-axle driveline (8) to vehicle and install two bearing caps (10).
2.
Install two new screws (9) to each of two bearing caps (10). Tighten screws to 36 lb-ft (49 Nm).
NOTE
Perform following steps at front end of inter-axle driveline.
3.
Position inter-axle driveline (8) to vehicle and install two bearing caps (7).
4.
Install two new screws (6) to each of two bearing caps (7). Tighten screws to 36 lb-ft (49 Nm).
5.
Lubricate driveline (WP 0021 00).
END OF WORK PACKAGE
8
6
7
10
9
