TM 9-2320-302-20
0129 00-2
DRIVELINE REPLACEMENT - CONTINUED
0129 00
MAIN DRIVELINE REMOVAL - CONTINUED
NOTE
Perform following step at front end of main driveline.
1.
Remove four screws (1) and two bearing straps (2) from universal joint of main driveline (3). Discard screws.
NOTE
Perform following step at rear end of main driveline.
2.
Remove four screws (4) and two bearing straps (5) from universal joint of main driveline (3). Discard screws.
3.
Remove main driveline (3) from vehicle.
INTER-AXLE DRIVELINE REMOVAL
WARNING
Driveline is heavy. Support end of driveline as bearing straps are removed to prevent driveline from falling.
Failure to follow this warning may cause serious injury to personnel.
1
3
5
4
2
