TM 9-2320-302-20
0056 00-1
STARTER REPLACEMENT
0056 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Wrench, torque, 0-300 lb-in (Item 44, WP 0236 00)
Wrench, torque, 15-75 lb-ft (Item 45, WP 0236 00)
Wrench, torque, 50-250 lb-ft (Item 46, WP 0236 00)
Personnel Required
Two
Equipment Condition
Master battery switch OFF (TM 9-2320-302-10)
REMOVAL
1.
Remove nut (1), washer (2), cable (3), and wire (4) from threaded stud (5).
2.
Remove nut (6), washer (7), cable (8), and three wires (9) from starter (10).
3.
Remove nut (11), washer (12), and wire (13) from starter (10).
4.
Remove nut (14), washer (15), cable (16), ground strap (17), and two wires (18) from starter (10).
5.
While supporting starter (10), remove three screws (19). Remove starter from engine flywheel housing (20).
3
4
1
10
19
15
16
14
18
20
2
5
17
9
8
7
6
13
12
11
