TM 9-2320-302-20
0055 00-2
ALTERNATOR REPLACEMENT - CONTINUED
0055 00
REMOVAL - CONTINUED
3.
Remove cap screw (8), bearing washer (9), and adjusting rod link (10) from alternator (3).
4.
Support alternator (3) and remove lock nut (11), cap screw (12), three bearing washers (13), alternator, and angle
bracket (14) from lower mount (15). Discard lock nut.
5.
Hold alternator pulley (16) in vise and remove hex nut (17), key (18), and pulley from alternator (3). Retain pulley for
use on new alternator.
6.
Inspect lower mounting bracket (15) for damage. If damaged, remove two bolts (19), nuts (20) and lower mounting
bracket.
7.
Inspect adjusting rod (21) for damage. If damaged, remove cap screw (22), lock washer (23), spacer (24), and adjusting
rod. Discard lock washer.
8.
Remove two hex nuts (25) and adjusting rod link (10) from adjusting rod (21).
INSTALLATION
1.
Install pulley (16) and key (18) on alternator (3) with hex nut (17).
2.
If removed, install lower mounting bracket (15) with two bolts (19) and nuts (20).
3.
If removed, install adjusting rod (21), with two hex nuts (25) and adjusting rod link (10), with new lock washer (23),
spacer (24), and cap screw (22).
4.
Support alternator (4) and secure to lower mounting bracket (15) with cap screw (12), three bearing washers (13), angle
bracket (14), and new lock nut (11). Do not tighten at this time.
5.
Install alternator (3) on adjusting rod link (10) with bearing washer (9) and cap screw (8).
11
13
13
3
2
14
20
15
19
12
13
17
18
16
8
9
22
23
21
24
10
25