TM 9-2320-302-20
0058 00-2
BATTERY EQUALIZER REPLACEMENT - CONTINUED
0058 00
REMOVAL - CONTINUED
4.
Remove nut (16), two washers (17), and bolt (18) securing cable bracket (19) to equalizer bracket (20).
5.
Remove remaining five nuts (16), ten washers (17), five bolts (18), and battery equalizer (21).
NOTE
Perform step 6, only if bracket is damaged.
6.
Remove two nuts (22), four washers (23), two bolts (24), and bracket (20).
INSTALLATION
NOTE
Perform step 1, only if bracket was removed.
1.
Position bracket (20) and handtighten two bolts (24), four washers (23), and two nuts (22).
2.
Position battery equalizer (21) and handtighten top three nuts (16), six washers (17), and three bolts (18).
3.
Position cable bracket (19) on bottom center hole and handtighten one nut (16), two washers (17), and one bolt (18).
4.
Handtighten remaining two bolts (18), four washers (17), and two nuts (16).
5.
Tighten eight nuts (16 and 22).
21
16
17
19
20
22
23
18
17
23
24
