TM 5-2330-325-14&P
This task covers:
a. Replacement/Repair
Initial Setup:
Equipment Conditions:
Materials/Parts:
Trailer parked on level ground, brakes engaged
Tape, anti-seizing (item 21, Appendix F)
and wheels chocked.
Tie, plastic (item 24, Appendix F)
Tools/Test Equipment:
Tool kit, mechanics general,
NSN 5180-00-177-7033
NOTE
Air hoses can be replaced or repaired, depending on the length of
the damaged section. If damaged air hose is short, replace it. If
damaged air hose is long, repair it. Ensure air pressure has been
relieved from air system prior to removing, replacing or repairing
airlines.
See paragraphs 4-21 (Lines and Ports), 4-22 (Anti-seize Tape), and
4-23 (Tubes and Compression Fittings) for general air brake hose
maintenance instructions.
a.
Replacement/Repair. Air hoses are not ordinarily removed except if they need to be replaced.
Badly damaged air hoses must be replaced. Air hoses must be tightly attached and connected.
See air brake system schematic (para. 4-59) diagram for additional information.
FOLLOW-ON TASKS:
Check air brake system for leaks (para. 4-56).
