TM 5-2330-325-14&P
4-61.
HUB AND BRAKEDRUM REPLACEMENT (Continued).
(9)
Install keyed washer (3). If necessary, back off inner nut (4) so that alignment pin on inner
nut mates into closest hole in keyed washer (3).
(10)
Install tabbed washer (2).
(11)
Install outer bearing nut (1), using 3-1/4 in. (8.26 cm) wheel bearing locknut wrench. Turn
nut (1) tightly against keyed washer (3). Torque outer bearing nut (1) to 150 ft-lb (203.4 N
m).
NOTE
A minimum of two tabs must be bent down on tabbed washer (2).
(12)
Bend tabs on tabbed washer (2) against outer bearing nut (1).
4-85
