TM 5-2330-325-14&P
4-61.
HUB AND BRAKEDRUM REPLACEMENT (Continued).
(4)
Back off brake drum (16) from hub (7).
(5)
Bend tabs on tabbed washer (2) and remove 3- 1/2 in. (8.26 cm) outer bearing nut (1),
tabbed washer (2), keyed washer (3) and 3- 7/8 in. (9.84 cm) inner nut (4).
CAUTION
DO NOT remove studs (13) from hub unless stud(s) are damaged.
(6)
Remove outer bearing set (5 & 6).
NOTE
Perform steps 7 and 8 if hub (7), inner bearing set (8 & 9) and/or seal (10)
are damaged and are to be replaced.
(7)
Remove hub (7) and studs (13).
(8)
Remove grease seal (10) and inner bearing set (8 & 9).
(9)
Remove gravel guard (11). Discard gravel guard.
4-83
