TM 5-2330-325-14&P
This task covers:
Repair/Replacement
Initial Setup:
Equipment Conditions:
Materials/Parts:
Trailer parked on level ground, brakes engaged and
Tie, plastic (item 24, Appendix F)
wheels chocked.
Tools/Test Equipment
General Safety Instructions:
Tool kit, mechanics general,
Remove all power to trailer prior to making
NSN 5180-00-177-7033
any repairs on the electrical system.
Shop equipment, common set No. 1,
NSN 4910-00-754-0654
WARNING
Remove all power to trailer prior to making any repairs on the electrical
system. Failure to do so may result in serious injury or death.
NOTE
Wiring harnesses can be replaced or repaired depending on the type
of damage. Broken wires can be spliced and sealed with heat shrink
tubing or electrical tape.
See paragraphs 4-17 (tagging wires and hoses), 4-18 (soldering), 4-19
(heat shrink tubing), and 4-20 (electrical ground points) for general
wiring harness maintenance instructions.
Replacement/Repair. Wiring harnesses are not ordinarily removed except if they are
badly damaged and must be replaced. Wiring harness connections must be tightly
attached and connected. See wiring diagram (para. 4-45) for additional information.
FOLLOW-ON TASKS:
Check electrical system for proper operation.
