TM 5-2330-325-14&P
4-41.
TAIL LIGHT REPLACEMENT (Continued).
d.
Installation.
(1)
Position rubber grommet (2) in tail light mounting opening and rotate grommet so that word
"TOP" is uppermost.
(2)
Connect electrical connector (3) to rear of tail light lens (1) and secure with locking tab (4).
(3)
Align tail light so that electrical connector is at bottom and push lens into grommet until it
seats in place.
NOTE
Lens should be evenly aligned with grommet before pushing. Liquid
soap may be used to lubricate the grommet.
FOLLOW-ON TASKS:
Check electrical system for proper operation.
4-41
