TM 5-2330-325-14&P
This task covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
General Safety Instructions:
Trailer parked on level ground, brakes engaged
Remove all power to trailer prior to making
and wheels chocked.
any repairs on electrical system.
Tools/Test Equipment
Tool kit,mechanics general,
NSN 5180-00-177-7033
a.
Removal.
WARNING
Remove all power to trailer prior to making any repairs on the electrical system.
Failure to do so may result in serious injury or death.
(1)
Grasp clearance light lens (1) or (6) and work or pry lens away from grommet (2) or (7).
(2)
Release locking tabs (5) if present and disconnect clearance light lens (1) or (6) from
electrical connector (3 or 4).
b.
Installation.
(1)
Connect electrical connector (3) or (4) to rear of clearance light lens (1) or (6) and check
that locking tab (5), if present, engages.
(2)
Position clearance light lens (1) or (6) onto grommet (2) or (7) and evenly push on lens
until it seats in place.
NOTE
To facilitate seating of lens in grommet, liquid soap may be used to
lubricate grommet.
