M1070 HET ARMOR KIT
II113400
Rev. D
7. Install Clamping Catch and Button Press Point Spacers to hood as shown. (See Figure 4-2)
a. Disconnect Clamping Catch and Button Press Point components as per TM 9-2320-360-2.
b. Insert Clamping Catch Spacer (1) and Button Press Point Spacer (2) and re-install components from 7.a.
using new fasteners: longer bolts (3), locknuts (4), and screws (5). (Fasteners not seen, as components are
shown assembled in Figure 4.2.)
3
4
1
5
2
Figure 4-2. Hood Clamping Catch and Button Press Point Spacer Installation
APRIL 2005