M1070 HET ARMOR KIT
II113400
Rev. D
a. Installation
1. Install seat back quick-release as follows (see Figure 3-89):
a. Remove two bolts and seat back frame guide from both sides of the rear cab wall. Retain bolts for
re-installation.
b. Install one left release assembly bracket (not shown) (1) and one right release assembly bracket (2) and
secure each with bolts removed in previous step.
c. Remove both quick release pins allowing quick-release bars to rotate downward.
d. Re-install backseat seat back into upright position through slots and re-assemble quick-release bars and
pins.
INSTALLATION 3-184
JUNE 2005