M1070 HET ARMOR KIT
II113400
Rev. D
14. Install windshield wiper arms (retained from Teardown, Chapter 2) per TM 9-2320-360-20-2.
15. Install beacon light assembly (retained from Teardown, Chapter 2) per TM 9-2320-360-20-2.
16. Install work lights (retained from Teardown, Chapter 2) onto rear of cab per TM 9-2320-360-20-2.
17. Install the vehicle identification plate (P/N 1805190) (Retained from Teardown, Chapter 2) onto dash panel
near glove-box as shown in Figure 4-6. Attach using four #10 x 0.500 inch Phillips Pan-head Self-Tapping
screws (1).
Figure 4-6. Vehicle Identification Plate Re-Attachment.
APRIL 2005