M1070 HET ARMOR KIT
II113400
Rev. D
4. Re-install the tire pulley and tire-mount bracket as shown (see Figure 3-15).
a. Re-install tire pulley bracket (retained from Teardown, Chapter 2) using four bolts (1),
eight flat washers (2), four spacers (3), and four locknuts (4). Torque locknuts to 35 lb-ft.
b. Re-install tire mount bracket (retained from Teardown, Chapter 2) using four bolts (1),
eight flat washers (2), four spacers (3), and four locknuts (4). Torque locknuts to 35 lb-ft.
INSTALLATION 3-26
JUNE 2005