M1070 HET ARMOR KIT
II113400
Rev. D
5. Install beacon light bracket as follows (see Figure 3-16):
a. Re-install beacon light bracket assembly (retained from Teardown, Chapter 2) using three bolts (1),
three lock washers (2), and three spacers (3). Torque bolts to 23 lb-ft.
b. Slide all seven 90-degree joiner brackets firmly into position against cab and torque all 90-degree joiner
locknuts to 23 lb-ft.
c. Torque locknuts on the top of the Rear Panel Bracket to 23 lb-ft.
INSTALLATION 3-28
JUNE 2005