TB 9-2320-360-13&P-2
DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT - CONTINUED
0014 00
REMOVAL - CONTINUED
11.
Remove three bolts (45), washers (44), and doubler (43) from support (17).
12.
Remove bolt (55) and washer (56) from support (31).
13.
Remove two capscrews (58), washers (59), handle (60), and doubler (57) from support (31).
14.
Remove eight locknuts (39), washers (40), screws (42), and four ramps (41) from retainer (16). Discard locknuts.
15.
Remove locknut (53), washer (54), capscrew (50), spacer (51), and guide (52) from support (31). Discard locknut.
16.
Remove four locknuts (48), washers (49), screws (46), and two ramps (47) from door (30).
19
20
18
48,49
47
21,22
46
45
23,24
18
44
43
25,26
17
42
39,40 41
27,28
16
29
14,15
27,28
12,13
29
30
50,51
52
37,38
36
31
14,15
60
53,54
34,35
57
55,56
32,33
58,59
417-129
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Install two ramps (47), four screws (46), washers (49), and new locknuts (48) on door (30).
2.
Install guide (52), spacer (51), capscrew (50), washer (54), and new locknut (53) on support (31).
3.
Install four ramps (41), eight screws (42), washers (40), and new locknuts (39) on retainer (16).
4.
Install doubler (57), handle (60), two washers (59), and capscrews (58) on support (31).
5.
Install washer (56) and bolt (55) on support (31).
6.
Install doubler (43), three washers (44), and bolts (45) on support (17).
0014 00-4