TB 9-2320-360-13&P-2
DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT - CONTINUED
0014 00
REMOVAL
1.
Open door assembly and open door ballistic glass (5).
2.
Remove locknut (6), bolt (7), and two washers (8). Discard locknut.
3.
Lift handle (9) and rotate over bracket (10) toward hinge edge of door.
4.
Remove bolt (1), spacer (2), locknut (3), and washer (4) from bottom channel (11). Discard locknut.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
NOTE
Door ballistic glass weighs 75 lb (34 kg).
5.
With assistance, lift up on handle (9) and remove door ballistic glass (5) by sliding out end of channel (11).
5
1,2,3,4
6,7,8
9
11
10
417-127
0014 00-2