TB 9-2320-360-13&P-2
DOOR ASSEMBLY REPLACEMENT - CONTINUED
0015 00
REMOVAL - CONTINUED
1,2
3
4,5
3.
Open door assembly and remove bolt (1), washer (2),
and strap assembly (3) from top of door assembly (8).
4.
If strap assembly (3) is damaged, remove locknut (4),
washer (5), bolt (6), washer (7), and strap assembly (3)
from door frame. Discard locknut.
6,7
8
417-091
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
10
Door assembly weighs 330 lb (150 kg).
9
5.
Attach lifting device to lifting eyes or door assembly
8
(8).
6.
Remove 13 locknuts (9), washers (10), and bolts (11)
11
from door assembly (8). Discard locknuts.
7.
Use lifting device to remove door assembly (8) from
hinge (12) and place on flat surface.
8.
Remove lifting device from door assembly (8).
12
417-090
0015 00-2