TB 9-2320-335-13&P
10-24.1. ENGINE RIGHT SPLASH SHIELD MAINTENANCE
(SERIAL NUMBERS 300000 AND ABOVE)
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-387-10
automotive (Appendix B, Item 1)
TM 9-2320-387-24-1
Maintenance and repair shop equipment:
TB 9-2320-335-13&P, Appendix E
automotive (Appendix B, Item 2)
Equipment Condition
Materials/Parts
Hood raised and secured
Eight locknuts (Appendix A, Item 76)
(TM 9-2320-387-10).
Locknut (Appendix A, Item 77)
Battery ground cables disconnected
Two locknuts (Appendix A, Item 82)
(TM 9-2320-387-24-1).
Two lockwashers (Appendix A, Item 145)
Maintenance Level
Four lockwashers (Appendix A, Item 172)
Unit
a. Removal
1.
Disconnect hood harness (39) from connector (20).
2.
Remove four capscrews (24), lockwashers (25), and washers (26) from splash shield bracket (10) and
plate (19). Discard lockwashers (25).
3.
Remove capscrews (13) and (22), harness (16), clamp (17), and plate (19) from headlight housing (14).
4.
Remove four nuts (21), capscrews (18), and connector (20) from plate (19).
5.
Remove locknut (12), washer (11), capscrew (29), and washer (28) from splash shield (1) and support
bracket (27). Discard locknut (12).
6.
Remove capscrew (32), lockwasher (31), and washer (30) from splash shield (1) and airlift bracket (9).
Discard lockwasher (31).
7.
Remove locknut (7), washer (6), capscrew (34), and washer (33) from splash shield (1) lower airlift
bracket (8). Discard locknut (7).
8.
Remove locknut (35), washer (36), capscrew (2), harness (37), and clamp (38) from splash shield (1).
Discard locknut (35).
9.
Remove capscrew (3), lockwasher (4), and washer (5) from airlift bracket (9). Discard lockwasher (4).
10-8