TB 9-2320-335-13&P
10-23.1. ENGINE LEFT SPLASH SHIELD MAINTENANCE
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
b. Disassembly
1.
Remove three locknuts (11), washers (12), capscrews (14), and bracket (13) from splash shield (1).
Discard locknuts (11).
2.
Remove five locknuts (10), washers (9), capscrews (17), four rubber guards (18), seal retainer (16), and
seal (15) from splash shield (1). Discard locknuts (10).
3.
Remove three capscrews (5), washers (6), cover (7), and spring nuts (8) from splash shield (1).
4.
Remove four rivets (4), support (3), and reinforcement (2) from splash shield (1). Discard rivets (4).
c. Assembly
NOTE
For rivet replacement instructions, refer to TM 9-2320-387-24-1.
1.
Install support (3) and reinforcement (2) on splash shield (1) with four rivets (4).
2.
Install cover (7) on splash shield (1) with three washers (6), capscrews (5), and spring nuts (18).
3.
Install seal (15), seal retainer (16), and four rubber guards (18) on splash shield (1) with five
capscrews (17), washers (9), and locknuts (10).
4.
Install bracket (13) on splash shield (1) with three capscrews (14), washers (12), and locknuts (11).
10-4