TB 9-2320-335-13&P
10-24.1. ENGINE RIGHT SPLASH SHIELD MAINTENANCE
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
d. Installation
1.
Install splash shield (1) on airlift bracket (9) with washer (5), lockwasher (4), and capscrew (3).
2.
Install harness (37) and clamp (38) on splash shield (1) with capscrew (2), washer (36), and
locknut (35).
3.
Install splash shield (1) on lower airlift bracket (8) with washer (33), capscrew (34), washer (6), and
locknut (7).
4.
Secure splash shield (1) to airlift bracket (9) with washer (30), lockwasher (31), and capscrew (32).
Tighten capscrew (32) to 15 lb-ft (20 Nm).
5.
Install splash shield (1) on support bracket (27) with washer (28), capscrew (29), washer (11), and
locknut (12).
6.
Install connector (20) on plate (19) with four capscrews (18) and nuts (21).
7.
Install spring nuts (15) and (23) on plate (19).
8.
Install plate (19) on headlight housing (14) with hex-head screws (13) and (22), harness (16), and
clamp (17).
9.
Install plate (19) on splash shield (1) with four washers (26), lockwashers (25), and capscrews (24).
10.
Connect hood harness (39) to connector (20).
10-12