TB 9-2320-335-13&P
10-24.1. ENGINE RIGHT SPLASH SHIELD MAINTENANCE
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
b. Disassembly
1.
Remove locknut (2), washer (3), capscrew (6), washer (5), and bracket (4) from splash shield (1).
Discard locknut (2).
2.
Remove three locknuts (16), washers (15), capscrews (14), and support bracket (13) from splash
shield (1). Discard locknuts (16).
3.
Remove five locknuts (12), washers (11), capscrews (8), four rubber guards (9), seal retainer (7), and
seal (10) from splash shield (1). Discard locknuts (12).
c. Assembly
1.
Install seal (10), seal retainer (7), and four rubber guards (9) on splash shield (1) with five capscrews (8),
washers (11), and locknuts (12).
2.
Install support bracket (13) on splash shield (1) with three capscrews (14), washers (15), and
locknuts (16).
3.
Install bracket (4) on splash shield (1) with washer (5), capscrew (6), washer (3), and locknut (2).
Ensure second hole in bracket (4) aligns with hole (17) in splash shield (1).
10-10