TB 9-2320-279-13&P-4
FIELD MAINTENANCE
HEAVY-DUTY WINCH CONTROL VALVE REMOVAL/INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Packing, Preformed (WP 0084, Table 1, Item 26)
Cap and Plug Set (WP 0081, Table 2, Item 1)
Qty: 3
Pan, Drain, 4 Gallon (WP 0081, Table 2, Item 3)
Locknut (WP 0084, Table 1, Item 3) Qty: 4
Tool Kit, General Mechanic's: Automotive (WP
Packing, Preformed (WP 0084, Table 1, Item 24)
0081, Table 2, Item 5)
Qty: 3
Wrench, Adjustable, 18 inch (WP 0081, Table 2,
Locknut (WP 0084, Table 1, Item 7) Qty: 3
Item 6)
Packing, Preformed (WP 0084, Table 1, Item 27)
Socket, 1 1/2 inch, 1/2 inch Drive (WP 0081, Table
Qty: 1
2, Item 6)
Goggles, Industrial (WP 0081, Table 2, Item 7)
References
Parts Manual (Fig. 27)
Materials/Parts
Parts Manual (Fig. 1)
Cable Ties, Plastic (WP 0083, Table 1, Item 1)
Oil, Lubricating (WP 0083, Table 1, Item 25, 26, 27,
Equipment Condition
28)
Batteries disconnected (TM 9-2320-315-14&P).
Tags, Identification (WP 0083, Table 1, Item 30)
Packing, Preformed (WP 0084, Table 1, Item 28)
Qty: 2
REMOVAL
NOTE
Tag and mark connectors prior to removal to ensure proper installation.
Remove cable ties as required.
1. Disconnect connector SV10 (1) from reel in coil (2).
0072-1
