TB 9-2320-279-13&P-4
0024
TEST 19 - Can heavy-duty winch control valve harness wire 1843 be repaired?
WARNING
Ensure electrical power is off prior to working on all electrical connections. Failure to comply
may result in injury or death to personnel.
Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around
vehicle. Jewelry and tools can catch on equipment, contact positive electrical circuits, and
cause a direct short, severe burns, or electrical shock. Failure to comply may result in injury
or death to personnel.
NOTE
Wire is not repairable if damage cannot be visually located or if prior wire repair has already
reduced length of wire. Wire is not repairable if after repair, wire is too short to reach its
connection point.
1. Visually inspect wire 1843 from wire 1843/1854 splice to HIGH IDLE ON/OFF switch for repairability. Refer to
schematics.
Figure 19.
CONDITION/INDICATION
Can heavy-duty winch control valve harness wire 1843 be repaired?
DECISION
No - Replace heavy-duty winch control valve harness. (WP 0049)Test 42 - Does high idle operate?
Yes - Repair wire 1843 (refer to TM 9-2320-315-14&P).Test 42 - Does high idle operate?
