TB 9-2320-279-13&P-4
FIELD MAINTENANCE
WINCH CONTROL VALVE WIRE HARNESS REMOVAL/INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Locknut (WP 0084, Table 1, Item 10) Qty: 4
Tool Kit, General Mechanic's: Automotive (WP
Lockwasher (WP 0084, Table 1, Item 12) Qty: 1
0081, Table 2, Item 5)
References
Materials/Parts
Parts Manual (Fig. 1)
Cable Ties, Plastic (WP 0083, Table 1, Item 1)
Sealant, RTV200 Electrical (WP 0083, Table 1,
Equipment Condition
Item 29)
Batteries disconnected (refer to TM
Tags, Identification (WP 0083, Table 1, Item 30)
9-2320-315-14&P).
REMOVAL
NOTE
Tag and mark wires and connectors prior to removal to ensure proper installation.
Note position and remove cushion clips and cable ties as required.
1. Disconnect connector SV10 (1) from reel in coil (2).
0049-1