TB 9-2320-279-13&P-4
0024
DECISION
No - Test 4 - Can heavy-duty winch control valve harness wire 1854 be repaired?
Yes - Test 5 - Is continuity measured on remote control cable wires 1849 and 1854?
TEST 4 - Can heavy-duty winch control valve harness wire 1854 be repaired?
WARNING
Ensure electrical power is off prior to working on all electrical connections. Failure to comply
may result in injury or death to personnel.
Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around
vehicle. Jewelry and tools can catch on equipment, contact positive electrical circuits, and
cause a direct short, severe burns, or electrical shock. Failure to comply may result in injury
or death to personnel.
NOTE
Wire is not repairable if damage cannot be visually located or if prior wire repair has already
reduced length of wire. Wire is not repairable if after repair, wire is too short to reach its
connection point.
1. Visually inspect wire 1854 from wire 1843/1854 splice to remote control connector, terminal C for repairability.
Refer to schematics.
Figure 4.
CONDITION/INDICATION
Can heavy-duty winch control valve harness wire 1854 be repaired?