TB 9-2320-279-13&P-4
0024
TEST 8 - Is continuity measured on heavy-duty winch remote control unit harness wires 1849, 1854, and
1854B?
WARNING
Ensure electrical power is off prior to working on all electrical connections. Failure to comply
may result in injury or death to personnel.
Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around
vehicle. Jewelry and tools can catch on equipment, contact positive electrical circuits, and
cause a direct short, severe burns, or electrical shock. Failure to comply may result in injury
or death to personnel.
1. Loosen four screws and lift cover from heavy-duty remote control unit. (WP 0047)
2. Set multimeter switch to ohms.
3. Connect positive (+) probe of multimeter to wire 1849 at remote control cable connector, terminal D. Refer to
schematics.
0024-9
