II106700-7
Rev. -
Cleaning Decal,
P/N 104301-1
(Peel and apply to
the inside surface
of the Windshield)
Windshield Wiper and Hardware
(Previously Removed)
Wiper Extension,
P/N 111408-1
Figure 22. Windshield Wiper and Cleaning Decal installation.
u. Install the Wiper Extension (P/N 111408-3) by threading the part fully onto the wiper
shaft and locking it in place using the set screw located on the side of the Wiper
Extension (see Figure 22). Re-attach the Windshield Wiper and Hardware that was
previously removed. Reconnect the wiper fluid hose to its nodule. Adjust the wiper
as necessary for correct arm travel.
v. It is recommended that a leak check of the windshield be performed prior to returning
the vehicle to service.