TB 2300-420-20-1
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (REAR ONLY OF TWO-PIECE)-Continued
5. At transmission bellcrank assembly using pliers,
remove clip (G) and pin (H) securing connector
(J) to bellcrank (K)
6. Using a 9/16 inch socket and extension, remove
two screws (L), washers (M) and bracket (N)
from bracket assembly (P).
7. Using 9/16 inch wrench on nut (Q) and
adjustable wrench, remove connector (J) and nut
(Q).
8. Use an adjustable wrench to hold support
bracket (N). Using a 15/16 inch wrench, remove
nut (R) and preformed packing (S).
Throw away packing (S)
9. Using a 15/16 inch wrench, remove nut (T) and
lockwasher (U) from control assembly (C).
Remove support bracket (N) and lockwasher
(V).
10. Using a 15/16 inch wrench, remove nut (W) from
control assembly (C).
TA173284
46