TB 2300-420-20-1
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (ONE-PIECE)- Continued
7. Position new control assembly (B) near bell
crank on top of transmission.
8. Using 15/16 inch wrench, install nut (F) and
lockwasher (G) on control assembly (B).
9. Place bracket (H) on control assembly (B).
10. Using 15/16 inch wrench, install lockwasher (J)
and nut (K).
11. Install new packing (L) in nut (M), using a 15/16
inch wrench install nut (M) on control assembly
(B).
12. Use an adjustable wrench to install connector
(N) on end of control assembly (B).
TA173268
30