TB 9-2300-420-20-1
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (ONE-PIECE)- Continued
12. Using screwdriver, remove four screws (U) and
washers (V) securing retainer (W) and control
assembly (L) to bulkhead.
13. Grasp control assembly (L) with both hands and
pull forward 1 to 2 inches. Remove split bushing
(X). Throw bushing (X) away.
14. At transmission bellcrank assembly, using slip
joint pliers, remove clip (Y) and pin (Z) securing
connector (AA) to bellcrank (AB). Throw clip (Y)
away.
15. Using a 9/16 inch socket and extension, remove
two screws (AC), washers (AD), and support
bracket (AE) from bracket assembly.
TA173264
26