TB 9-2300-420-20-1
SECTION IV. PARKING BRAKE PAWL ADJUSTMENT
SUBJECT
PAGE
Brake Pawl Adjustment
Gage Block Fabrication
TOOLS:
9/16 inch combination wrench (two required)
15/16 inch combination box and opened box wrench (two required)
7/16 inch socket with 3/8 inch drive
6 inch steel rule
Pry bar
Slip joint pliers
SPECIAL TOOLS: None
FABRICATED TOOLS: Gage blocks (three required)
SUPPLIES:
Cotter pins (NSN 5315-00-842-3044) (P/N MS24665-283)
Gasket, housing cover (two required) (NSN 5330-00-888-9403) (P/N 10911888)
Locating pin (welding rod 1/8 inch diameter by 4 inches long)
TA 173252
14