TM 9-2320-363-34-2
20.
APPLY LIGHT COATING OF OIL TO TWO NEW PACKINGS (26 AND 27). INSTALL TWO PACKINGS
(26 AND 27) IN VALVE HOUSING (9).
21.
APPLY LIGHT COATING OF OIL TO NEW PACKING (28) AND NEW SEAL RING (29). INSTALL
PACKING (28) AND SEAL RING (29) ON RACK PISTON (30).
22.
W A R N I N G
Do not allow valve housing to contact poppet. Such contact could cause
steering problems or loss of steering resulting in possible injury to personnel.
PLACE RACK PISTON (30), WITH GUIDE HOLES UP, ON PADDED PEDESTAL HIGH ENOUGH SO
THAT VALVE HOUSING (9) CAN ROTATE WHEN ASSEMBLED. INSERT WORM END OF INPUT
SHAFT (16) INTO RACK PISTON (30) CLOSE TO MAXIMUM DEPTH. MAKE SURE VALVE
HOUSING (9) DOES NOT CONTACT POPPET (31). LINE UP RACK PISTON (30) GUIDE HOLES
WITH WORM TRACK GROOVES ON INPUT SHAFT (16).
19-23
