TM 9-2320-363-34-2
3.
INSTALL TRUNNION WASHER (5) IN HOUSING (2) WITH BEVELED SIDE FACING AWAY FROM
RETAINING RING (1).
4.
INSTALL NEW SEAL (6) ON INSTALLATION END OF TRUNNION INSTALLER (3) WITH SPRING
TOWARD SHOULDER OF TOOL.
5.
INSTALL SEAL (6).
6.
INSTALL NEW SEAL (7) AND NEW RETAINING RING (8). PACK BEARING (4) WITH GAA.
7.
PLACE VALVE HOUSING (9) IN SUITABLE VISE. APPLY LIGHT COATING OF OIL TO TWO NEW
PACKINGS (10 AND 11) AND TWO NEW SEAL RINGS (12 AND 13). INSTALL TWO PACKINGS (10
AND 11) AND TWO SEAL RINGS (12 AND 13).
19-19
