TM 9-2320-363-34-2
AIR DRYER REPAIR (CONT)
NOTE
Perform steps 2 and 3 to remove each of two
orifice sets.
2.
REMOVE LARGE PACKING (3) SNAP
RING (4), ORIFICE (5), MEDIUM PACKING
(6) AND SMALL PACKING (7) FROM AIR
DRYER
HOUSING
(2).
DISCARD
PACKINGS.
3.
REMOVE CHECK VALVE (8) SPRING (9)
AND PERFORATED WASHER (10).
NOTE
4.
5.
Perform steps 4 thru 8 to remove left piston seal and spring set.
REMOVE FOUR SCREWS (11) AND COVER (12) FROM AIR DRYER HOUSING (2).
REMOVE SMALL PACKING (13) AND TWO LARGE PACKINGS (14) FROM COVER (12). DISCARD
PACKINGS.
6.
7.
REMOVE SPRING (15) AND PISTON (16) ASSEMBLY FROM AIR DRYER HOUSING (2).
REMOVE TWO SNAP RINGS (17) SPOOL (18) ASSEMBLY, TWO SMALL PACKINGS (19) AND TWO
LARGE PACKINGS (20) FROM PISTON (16). DISCARD PACKINGS.
8.
REMOVE LIP SEAL (21) FROM SPOOL (18). DISCARD LIP SEAL.
18-10
Change 1
