TM 9-2320-363-34-2
6.
REMOVE FOUR SCREWS (16) LOCK
WASHERS (17) AND LOWER BODY (7)
FROM UPPER BODY (18). REMOVE
PREFORMED PACKING (19) FROM
LOWER BODY.
7.
REMOVE PRIMARY PISTON RETAINER
(20) FROM UPPER BODY (18).
WARNING
Internal components are under spring pressure.
Use care when disassembling or assembling.
Failure to hold components in position may result
in injury to personnel.
8.
9.
10.
11.
WHILE HOLDING PRIMARY PISTON (21)
AND PISTON (22) IN POSITION IN
UPPER
BODY
(18)
USE
A
SCREWDRIVER IN HEAD OF SCREW
(23) TO PREVENT SCREW FROM
TURNING.
REMOVE LOCK NUT (24), RETAINER
(25) AND SPRING (26) FROM SCREW
(23). REMOVE SCREWDRIVER AND
GRADUALLY
RELEASE
PRIMARY
PISTON (21) AND PISTON (22).
REMOVE PRIMARY PISTON (21) AND
SPRING (27) FROM UPPER BODY (18).
REMOVE PREFORMED PACKING (28)
AND RUBBER WASHER (29) FROM
PRIMARY PISTON.
REMOVE SLEEVE NUT (30), SPRING
SEAT (31) AND RUBBER SPRING (32)
FROM PRIMARY PISTON (21).
Change 1
18-5
