TM 9-2320-363-34-2
4.
INSTALL RUBBER SPRING (16) AND
SPRING SEAT (17) TO PRIMARY
PISTON (18) WITH SLEEVE NUT (19).
5.
INSTALL RUBBER WASHER (20) AND
PREFORMED PACKING (21) TO
PRIMARY PISTON (18) AND INSTALL
SPRING (22) AND PRIMARY PISTON TO
UPPER BODY (1).
WARNING
Internal components are under spring pressure.
Use care when disassembling or assembling.
Failure to hold components in position may result
in injury to personnel.
6.
WHILE HOLDING PRIMARY PISTON (18)
AND PISTON (12) COMPRESSED, AND
USING A SCREWDRIVER TO PREVENT
SCREW (15) FROM TURNING, INSTALL
SPRING (23) AND RETAINER (24) TO
SCREW WITH LOCK NUT (25).
7.
INSTALL PRIMARY PISTON RETAINER
(26) TO UPPER BODY (1).
8.
INSTALL PREFORMED PACKING (27)
TO LOWER BODY (28) AND INSTALL
LOWER BODY TO UPPER BODY (1)
WITH FOUR LOCK WASHERS (29) AND
SCREWS (30).
Change 1
18-7
