TM 9-2320-363-34-2
AIR DRYER REPAIR (CONT)
Use general cleaning methods to clean all parts (page 2-30).
1.
INSPECT VALVES AND PISTONS FOR WEAR OR DAMAGE.
2.
INSPECT BORES AND SURFACES OF AIR DRYER HOUSING FOR DAMAGE.
Use general repair methods to repair damaged parts (page 2-33).
Lubricate all preformed packings and seals with grease prior to installing.
1.
2.
3.
4.
Perform steps 1 and 2 to install purge valve set.
INSTALL NEW PACKING (1) SHIM (2) (IF
EQUIPPED), SPRING (3), AND PISTON
ASSEMBLY (4) TO PURGE VALVE (5).
INSTALL NEW PACKING (6) AND PURGE
VALVE (5) ASSEMBLY TO AIR DRYER
HOUSING (7) WITH SNAP RING (8).
NOTE
Perform steps 3 and 4 to install
outlet check valve.
INSTALL NEW PACKING (9) TO CHECK
VALVE (10).
INSTALL CHECK VALVE (10), SPRING
(11), AND PERFORATED WASHER (12)
TO AIR DRYER HOUSING (7) WITH SNAP
RING (13).
NOTE
NOTE
18-14
Change 1
